Carpet Cleaning with our Truck Mounted Hot Water Extraction equipment.
- 2 hr2 hours
- Priced by the jobPriced by the job
- Customer's Place
Here is our 5 step Process: 1. We always Vacuum 2. We apply a proprietary mix Pretreatment /Traffic Lane Cleaner 3. Apply Rinsing Agent and extract the carpet 4. Spot clean as needed 5. Groom the carpet 1. Vacuum: First, we vacuum all of the carpets we are cleaning with a high-quality vacuum cleaner. Vacuuming is essential to do because vacuuming removes the non-soluble dirt, and it stands the carpet fibers up, so the next step is more effective. 2. Pretreating: Pretreating carpet is like pretreating laundry, you have to let the chemical sit there for a little bit to loosen the dirt. Also, since the carpet fibers are standing up after vacuuming, the pretreatment will get deeper into the carpet to loosen and suspend the deep-down dirt. Most stains do not need to be pretreated individually, but certain stains do, like Urine, Wine, or Blood, Tar, and Gum. So, At this point, we will pretreat them so they can be more easily removed later. 3. Extraction: When we extract the carpet, we use a no residue rinsing agent that helps rinse out the pretreatment along with the dirt, making sure there’s nothing left behind except clean carpet. While extracting the carpet, we make sure to overlap every stroke so that every square inch of the carpet gets thoroughly cleaned. 4. Spot & Stain Removal: Most spots and stains are removed with our regular cleaning process. As a result, if there are any left after we extract we will try to get them out. For the most part, they will be removed, but not all stains come out. 5. Groom: Finally, we Groom the carpet, also called “Finishing.” We reset the carpet pile, so it is standing straight up to speed the drying process.
2401 North Janeway Avenue, Moore, OK, USA